User Manual

19
Here we explain how you can use an iPad as a dedicated controller
for a target system. Make these settings as necessary.
* If you specify Guided Access, this app will be the only app that can be used
on the iPad; it will not be possible to select other applications by pressing the
home button or swiping the home indicator.
1. Start this app or KIOSK, and tap the file.
2. Turn the [Auto-load this file on next launch] switch On
().
3. In the home screen of the iPad, tap the [Settings] icon;
in the settings menu, tap [General].
4. In the General menu, choose [Accessibility] 
[Guided Access], and turn the guided access switch
On ( ).
5. After this app or KIOSK has started, click the home
button three times.
On models that do not have a home button, click the top button three
times.
The Homepage of this app (control panel) appears. If there is a region
for which you want to disable screen touch, use your finger to outline
that area. You can also disable the hardware button or specify a time
limit.
6. In the upper right corner of the screen, tap [Start]; a
passcode setting screen appears. Enter a passcode of
iPad; guided access is enabled.
If Guided Access is enabled, pressing the home button or swiping the
home indicator does not close this app (control panel).
To close the app, click the home button or top button three times and
enter the passcode to end Guided Access.
This ends the explanation of the basic workflow.
Start the iPad, and verify that you can control the target system from
the control panel that you created.
* When you start ProVisionaire Touch or KIOSK, the app automatically
searches for a Wi-Fi access point and the target system, and connects to
them.
For details on making connections, refer to “Preparations before
you make connections.”
12. Dedicating an iPad as a control panel