User Manual

11
Now let’s specify a device and a parameter that will be controlled by
this button.
1. In the [Devices] screen that appears when you tap the
Device Management button in the menu bar,
specify the device that will be controlled.  Register-
ing a device
For this example, set [Model] to “MTX3,” and [Unit ID] to “01.”
Assign a [Name] as you please. If there is a specific device that you
want to specify, read “Registering a device” and also specify the
appropriate monitor device.
2. Tap the button to access the following context menu.
3. Tap [Parameter].
The [Button Parameter Assign] screen appears.
4. To assign one parameter to the button, tap the func-
tion name of the button at the right edge of the [Mode]
field, and choose [Single Latch] from the menu that
appears.
The function name for an on/off switch will be [Single Latch].
5. In the [Devices] list, tap “the device that you specified
in step 1.”
A list of the assignable parameters appears.
Select the parameter that you want this button to turn on/off. For
example if you want the button to turn the channel 1 input on/off,
make the setting shown in the screen below.
* The setting screen differs depending on the selected button Mode.
* For details, refer to “Assigning parameters.”
6. Tap [Done] to complete the assignment.
* The icon which indicates that parameter assignment is incomplete
disappears when the parameter has been assigned.
2. Specify devices and parameters