User Manual

R Remote Version 3 User’s Guide 27
“Network Setup” dialog box
This appears when you choose [File] menu -> [Network Setup].
Here you can select the network interface card of the computer that will be used to communicate with
the R series (subsequently called “the network card”).
NOTICE
The various settings are initialized if you change network cards. In order to use the current settings,
please save the settings to a file and change the network card.
① Network card list
Select the network card that will be used to communicate with R series. When you double-click a
network card, the network card you double-clicked is selected and the dialog box closes.
If you only want to make settings without connecting an R series unit, select [Offline]. If you select
a network card, a load is placed on the connected network.
② [OK] button
Update the settings and closes the dialog box.
③ [Cancel] button
Close the dialog box without updating the settings.