User Manual

R Remote Version 2 User’s Guide 11
■Operating R Remote
Start R Remote.
Windows 7 users: click [Start]→[All Programs]→[Yamaha R Remote]→[R Remote]
Windows 8/8.1 users: in the "Start screen," double-click the [R Remote] tile.
Mac users: click [Go]→[Applications]→ double-click [R Remote].
・ When you start R Remote, the "Network Setup" dialog box may appear, allowing you to select the computer's
network card that will be used for communication with the R series units. If this appears, click the network card
that is connected to the R series unit, and then click the [Apply] button.
・ For R Remote for Windows 8 / Windows 8.1, depending upon user access privileges, the software's "Tile(icon)" may
not appear on the "Start screen". In such cases, you can find the software icon in "Apps" by the following steps:
1. Right-click anywhere on Start screen.
2.
Click "All apps" button at the bottom right side of Start screen.
Menu bar
The commands that can be executed by R Remote can be found here, grouped by category.
Click here to see a list of commands.
Menu
Command
Summary
Dialog box that appears
[File] [Open] Opens a previously-saved file (rrmt
format or rrm format).
If you open the file when R series units are
connected, the settings will be applied to the
R series units. Be aware that if a CL/QL
series console is also connected, its settings
will be overwritten.
“Open File” dialog box
[Save As]
Saves the file. It will have a file name
extension of rrmt, and will be usable
only by R Remote.
“Save File” dialog box
[Network Setup] Selects the computer’s network
adapter that will be used to
communicate with the R series.
"Network Setup" dialog
box
[Device Information]
Displays information about the R
series units that are connected.
"Device Information"
dialog box
[Quit] Quits R Remote. ---
[About]
[About R Remote]
Displays details such as the software
version of R Remote.
“About R Remote”
dialog box