User Manual

Yamaha Commercial Audio
Dante-MY16-AUD HA Remote Control Guide
5 www.yamahaproaudio.com
When the HA is controlled from the CL series, gain of the signal passing
through the network can be kept constant by the Gain Compensation function.
That is, in the example below, even if the HA gain is changed from the CL
series, the level of the audio signal to be input to the PM5D will not fluctuate.
When the HA is controlled from other consoles, the R series is operated in
AD8HR mode; therefore, the Gain Compensation function cannot be used.
Note:
To control nine or more units of R series from one CL series console, you can also
control the R series (in AD8HR mode) via a Dante-MY16-AUD inserted in slot 1.
Examples of the system mixed with AD8HR
The HA can be controlled even in the system mixed with such HA equipment
as the R series, the AD8HR, and the DME24N. However, when you control
these HAs, please ensure that their IDs are unique to each other. The ID of an
AD8HR is automatically assigned in the order of daisy chain connection, and
the ID of a DME24N is set with the DME Designer software. As for the R
series, its virtual AD8HR ID is set from the front panel rotary switch (cf. page
8).
Gain
Compensation
Native mode
AD8HR mode
CL
CL
Other Consoles
Other Consoles
Unit ID: 2 = Virtual ID 3, 4
Auto = ID 1, 2
AD8HR
Rio1608-D