User Manual

R Remote Version 5.0 User’s Guide 4
Using the PDF manual
 You can move to the corresponding page by clicking on links in the table of contents or in the text.
 If you want to find information on a specific topic, function or feature, select “Find” or “Search” from the
Adobe Reader “Edit” menu and enter a key word to locate the related information anywhere in the document.
 You can also click on desired items and topics you want to refer to in the “Bookmarks” index to the left of the
main display window, and jump to the corresponding page. (Click the “Bookmarks” tab to open the index if it
is not displayed.)
System Requirements
In order to use R Remote, you'll need the following items.
● A computer equipped with the following conditions:
OS
Windows 10
(R Remote supports 64-bit Windows only.)
macOS 10.14.x, macOS 10.15, macOS 11
CPU
Intel Core i3 or higher
HDD
120MB or more
Supported Devices (*)
Rio3224-D, Rio1608-D, Ri8-D, and Ro8-D (firmware V3.11 or later)
RSio64-D (firmware V3.10 or later)
RMio64-D (firmware V3.11 or later)
Tio1608-D, Rio3224-D2, and Rio1608-D2 (firmware V1.00 or later)
Others

An Ethernet connector (1000BASE-T or higher recommended)
 Ethernet cable (CAT5e or better)
 Network switch (with gigabit Ethernet support), when connecting devices
via a Dante network
 Dante Controller must be installed. (**)
(*) When the firmware version of the target device is out-of-date and unsupported, you will need to update the
firmware by using exclusive update software for each product.
(**) You can download Dante Controller from the download page of the following Audinate website. Dante
Controller V4.4.0.8 or later is required for macOS 10.15 or later.
https://www.audinate.com/products/software/dante-controller/
The Minimum System Requirements described above are applied to the R Remote version 5.0. Keep in mind
that the software is often updated and the system requirements are subject to change. You can check the latest
version information of each program and its system requirements at the following website
https://www.yamahaproaudio.com//
Operation
Keyboard Shortcuts
<Windows modifier key> (<Mac modifier key>) + <key> or click shows the shortcut keys. For example, <Ctrl>
(<command>) +click means “press <Ctrl> under Windows or <command> under Mac, then click.”
Right Click
On Mac click while holding down the <control> key.