User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
12
Let’s make the button change color to indicate its on/off state.
1. Tap the button to access the context menu, and tap
[Design].
2. In the upper part of the screen, tap the [On] tab.
The following screen appears.
3. Tap the [Color] field to access the color setting
screen. Switch the [Color] tab and [Preset] tab, and
specify the color of the button in the On state.
For details on color settings, refer to “Specifying a color.”
4. Tap [<] to return to the previous screen.
5. In the same way, use the [Off] tab to specify the color
of the button in the Off state.
Now let’s verify that the button changes color between On and Off.
6. Tap the operation mode button to switch to “Con-
trol Mode.”
7. Tap the button, and verify that the button changes
color as you specified.
8. Tap the operation mode button to switch to
“Design Mode.”
In addition to the button’s color, you can change things such as the
rounding of its corners and the design, thickness, and color of its
border. For details, refer to “Widget design.”
3. Specify the button on/off indication