User Manual

39
 For a Meter
[Bar] tab
Direction: Specifies the meter’s direction (Vertical/Horizontal 1/
Horizontal 2).
Style: Selects the meter’s display method.
On State Color: Specifies the color inside the meter below the
current value.  Specifying a color
Off State Color: Specifies the color inside the meter above the
current value.  Specifying a color
Gradient: Selects the type of gradation within the meter.
Round Corners: Selects whether the corners of the meter are
rounded.
Width: Specifies the width of the meter.
Border Style: Selects whether the meter has a border.
Border Color: Specifies the color of the meter’s border.  Spec-
ifying a color
Border Width: Specifies the width of the meter’s border.
[Guidelines] tab
Type: Specifies the style of guidelines: None, Normalized, 0 dB,
or 10 dB.
Position: Specifies the location in which the guidelines are dis-
played (Left/Right/Full).
Color: Specifies the color of the guidelines.  Specifying a color