User Manual

English
PRECAUTIONS
5
EN
• When transporting or moving the unit always use two or more people.
Attempting to lift the unit by yourself may damage your back, result in other injury,
or cause damage to the unit itself.
• Before moving this unit, be sure to turn off the power switch and disconnect all
connection cables.
Failure to observe this may damage the cables or cause you or someone else to
trip and fall.
• For proper installation of outdoor antenna, make sure to have it done by the
dealer from where you purchased the unit or by qualified service personnel.
Failure to observe this may cause the installation to fall and result in injury.
Installation requires special skills and experience.
?????
Hearing loss
?????
• Do not use the unit for a long period of time at a high or uncomfortable volume
level, since this can cause permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
• Before connecting the unit to other devices, turn off the power for all devices.
Also, before turning the power of all devices on or off, make sure that all volume
levels are set to the minimum.
Failing to do so may result in hearing loss, electric shock, or device damage.
• When turning on the AC power in your audio system, always turn on the unit LAST,
to avoid hearing loss and speaker damage. When turning the power off, the unit
should be turned off FIRST for the same reason.
Failure to observe the above may cause hearing impairment or speaker damage.
Maintenance
• Remove the power plug from the AC outlet before cleaning the unit.
Failure to observe this may cause electric shocks.
Handling caution
?????
• Do not touch the surface having this label.
Doing so may cause burns. The label on the device indicates that the
surface to which the label is attached may become hot during
operation.
• Do not insert foreign materials such as metal or paper into the openings of this
unit.
Failure to observe this may cause a fire, electric shocks, or malfunctions.
• Keep small parts out of the reach of infants.
Your children may accidentally swallow them.
• Do not do the following:
- Stand on or sit on the equipment.
- Put heavy items on top of the equipment.
- Place the equipment in a stack.
- Apply unreasonable force to buttons, switches, input/output terminals, etc.
Failure to observe this may cause injuries or damage to the equipment.
?????
• Avoid pulling the connected cables to prevent injuries or damage to the unit by
causing it to fall.
Battery use
• Do not use batteries other than specified batteries.
Doing so may cause fire or burns, or result in fluid leakage that may cause skin
inflammation.
• Do not use new batteries together with old ones.
Using new ones with old ones could cause a fire, burns, or inflammation due to
fluid leaks.
?????
• Do not mix battery types, such as alkaline batteries with manganese batteries, or
batteries from different makers, or different types of batteries from the same
maker, since this can cause a fire, burns, or inflammation due to fluid leaks.
• Keep batteries away from children.
A child could accidentally swallow a battery. Failure to observe this may also cause
inflammation due to battery fluid leaks.
• Do not put in a pocket or bag, carry, or store batteries together with pieces of
metal.
The battery could short, burst, or leak, causing a fire or injury.
• Always make sure all batteries are inserted in conformity with the +/- polarity
markings.
Failure to do so might result in a fire, burns, or inflammation due to fluid leaks.
?????
• When the batteries run out, or if the unit is not to be used for a long time, remove
the batteries from the remote control to prevent possible leakage of the battery
fluid.
• When storing or discarding batteries, insulate the terminal area by applying tape,
or some other protection.
Mixing them with other batteries or metal objects can cause a fire, burns, or
inflammation due to fluid.
Notice
Indicates points that you must observe in order to prevent product failure, damage
or malfunction and data loss.
Power supply
• If not using the unit for a long period of time, be sure to pull the power plug from
the outlet. Even if you place the unit in standby mode by pressing the z AMP
(Standby/On) key on the remote control, a small amount of current still flows
through the unit.
Installation
• Do not use this unit in a location that is exposed to direct sunlight that becomes
extremely hot, such as near a heater, or extremely cold, or that is subject to
excessive dust or vibration. Failure to observe this may cause the unit's panel to
become deformed, the internal components to malfunction, or for operation to
become unstable.
• If using a wireless function, avoid installing this unit near metal walls or desks,
microwave ovens, or other wireless network devices.
Obstructions could shorten the transmission distance.
Connections
• Do not connect this product to public Wi-Fi and/or Internet directly. Only connect
this product to the Internet through a router with strong password-protections.
Consult your router manufacturer for information on security best practices.
• If connecting external units, be sure to thoroughly read the manual for each unit
and connect them in accordance with the instructions.
Failure to properly handle a unit in accordance with the instructions could cause
malfunctions.
• Do not connect this unit to industrial units.
Digital audio interface standards for consumer use and industrial use are different.
This unit has been designed to connect to a consumer-use digital audio interface.
Connections to an industrial-use digital audio interface could not only cause this
unit to malfunction, but could also damage the speakers.
Handling
• Do not place vinyl, plastic, or rubber products on this unit. Failure to observe this
may cause discoloration or deformation in the panel of this unit.
• If the ambient temperature changes drastically (such as during unit transportation
or under rapid heating or cooling) and there is a chance condensation may have
formed in the unit, leave the unit for several hours without turning on the power
until it is completely dry before use. Using the unit while there is condensation can
cause malfunctions.
Maintenance
• When cleaning the unit, use a dry, soft cloth. Using chemicals such as benzine or
thinner, cleaning agents, or chemical scrubbing cloths can cause discoloration or
deformation.
Disposal or transfer
• Before you transfer ownership or dispose of this product, initialize the product
settings to default. If you transfer ownership or dispose of this product without
initializing the settings, your personal data may be stolen by a third party.
• If you plan to transfer ownership of this product, include this document and the
supplied accessories along with the product.
• Follow the rules of your local authority to dispose of this product and its
accessories.
• Follow the rules of your local authority to dispose of used batteries.