Receiver Quick Guide EN
Introduction Thank you very much for purchasing this Yamaha product. This product is a network-compatible Receiver (2 channel stereo amplifier) which lets you play music content from the radio or a network in your home as well as analog and digital audio inputs. With the YPAO function which optimizes the sound field automatically, you can enjoy the sound that best matches your room. About the Manuals Please be sure to read the following guides.
PREPARATION & OPERATION — Getting Started Read this guide according to the following flow. 1 PREPARATION .......................................................................4 1-1 Checking the included accessories ....................................................... 4 1-2 This guide requires the following items ............................................... 4 1-3 Connecting Speakers .............................................................................
1 PREPARATION 1-1 Checking the included accessories Check and make sure that you have all the following items. Power cord Batteries (AAA, R03, UM-4) (×2)* YPAO microphone DAB/FM antenna (FM antenna)* Safety Guide Remote control* Quick Guide (this manual) Items marked with * are not explained in this guide. See the User Guide for more information. Be sure to fill in the correct date of purchase and name of the store of purchase in the warranty, and then keep it in a safe place.
1-3 Connecting Speakers Connect the speakers as illustrated. Connect a subwoofer if needed. Speaker (Right channel) Speaker (Left channel) Subwoofer (built-in amp) + – – + DIGITAL IN NETWORK USB SPEAKERS R CH ANTENNA 1 OPTICAL 2 FM ANALOG IN SPEAKERS L CH COAXIAL LINE 1 SUBWOOFER OUT 75 A A R CD L R LINE 2 L R PRE OUT L TRIGGER B B OUT GND R 1 PHONO 12V L Peel back about 10 mm of insulation from the end of the speaker cable and twist the core wires tightly.
1-4 Flipping up the wireless antenna Flip up the wireless antenna as illustrated. NETWORK TV [ARC] SERVICE AC IN NOTICE • Do not exert excessive force on the wireless antenna. Doing so may damage it. 1-5 Connecting the power cord Connect the included power cord.
2 OPERATION 2-1 Turning the power on Turn the product on. 1 Put the z (Power) switch in the up position to turn the power on. The power indicator lights up. Power indicator -50 -40 z (Power) switch POWER METER PHONES SPEAKERS OFF PEAK INPUT 0 BAS VU DIMMER YPAO MIC 2 After the following message appears on the front display, press RETURN on the front panel to clear the message. It may take about 30 seconds for the message to appear. The portion shown as * differs depending on the device.
2-2 Automatic adjustment of speaker settings (YPAO) Use the included YPAO microphone and run YPAO. YPAO is a function that detects speaker connections and the distance from the listening position, then automatically adjusts the speaker settings, such as volume balance and tone. 1 Turn your subwoofers on and adjust the volume to its midpoint. If the crossover frequency can be adjusted, set it to the maximum.
3 Press SELECT on the front panel to start the automatic adjustment of speaker settings with YPAO. Adjustment starts automatically after about 10 seconds. It takes about 1 minutes. Do not make any unnecessary noise until the adjustments are complete. VOLUME RIGHT -50 -40 -30 WER 0.01 0.1 -20 1 -10 -0 +6 10 100 PURE DIRECT W/8 dB SELECT PUSH - ENTER LANCE LOUDNESS SELECT PUSH - ENTER FLAT PRESET -30dB RETURN CONNECT R 4 Check the results on the front display.
2-3 Configuring network settings After installing the dedicated smart-device app, “MusicCast Controller”, connect the product wirelessly to your network from the screen of the app. 1 Prepare your smart device. Refer to the Wi-Fi settings of the smart device and confirm that it is connected to the network of your wireless router. 2 Install “MusicCast Controller” on your smart device. Search for “MusicCast Controller” on the App Store or Google Play to download the app.
2-4 Playing Internet radio Use the app to confirm that you can play Internet radio. 1 Select “Net Radio” on the app’s screen. If you are connected to the Internet, a list of Internet radio stations appears. If it does not appear, reconnect to the Internet. 2 Choose the desired station. Choose the desired station from the list of Internet radio stations. 3 Adjust the volume. Adjust with the volume slider in the app. You can also adjust it with VOLUME on the front panel.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.
