User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
n
Configuring operations from a digital media controller
This configures whether this product can be controlled from a digital media controller (DMC). When enabled,
playback of this product can be controlled from a DMC on the same network as the product.
Setup menu
“Network” > “DMC Control”
Setting value
Disable Disables control from a DMC.
Enable Enables control from a DMC.
Related links
“Basic operation of the Setup menu”(p.94)
n
Configuring network standby
This sets whether the power of this product can be turned ON from a network device.
Setup menu
“Network” > “Network Standby”
Setting value
Off Disables network standby.
On
Enables network standby.
This consumes more energy than when it is “Off”.
Auto
Enables network standby.
The product goes into a power-save mode to save energy when in network standby and
“Bluetooth Standby” is “Off” and the network is disconnected for a certain period of time.
NOTE
(
If “Network Standby” is set to “Off”, “Bluetooth Standby” setting is disabled.
(
When in the power save mode, this product cannot be turned ON from a network device, even if it is connected via a network cable.
Turn the power of this product ON manually.
Related links
(
“Configuring Bluetooth”(p.101)
(
“Basic operation of the Setup menu”(p.94)
n
Setting the network name of this product
You can change the network name of this product that is displayed on the network.
98
SETTINGS > Setup menu (changing function settings)