User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
Listening to TV audio
Making settings for listening to TV audio
To listen to the audio of an ARC-compatible TV connected via HDMI cable, enable the HDMI control function
and configure the link between the TV and this product.
1 Press the SETUP key.
The Setup menu opens on the front display.
2 Select “TV” with the cursor keys (q/w) and then press the ENTER key.
“HDMI Control” is displayed.
3 Press the ENTER key.
4 Select “On” with the cursor keys (e/r) and then press the ENTER key.
5 Press the SETUP key.
6 Enable the TV HDMI control function.
Refer to the user's manual of the TV and make the settings.
7 Unplug the TV’s power plug from the outlet, then plug it back in and turn the TV
ON.
The HDMI connection between the TV and this product is configured and the link is set.
NOTE
If the HDMI control function of this product is turned from OFF to ON, the link has to be configured again.
Related links
(
“Connecting via HDMI to an ARC-compatible TV”(p.24)
(
“Listening to the audio of an HDMI-connected TV (ARC)”(p.59)
(
“Configuring your TV”(p.103)
58
PLAYBACK > Listening to TV audio