User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
PLAYBACK
Basic operations
Selecting the output speakers
Press the SP A/B key to select the output destination speaker.
VOLUME
/
MUTE
AMP
PHONO LINE 1 LINE 2
TV CD
USB DAC
OPT 1 OPT 2 COAX
TUNER
BLUETOOTH
NET
DISPLAY
SETUP
NOW PLAYING RETURN
OPTION
MEMORY PRESET
1 2
ENTER
3
SLEEP SP A/B
AMP
PHONO LINE 1 LINE 2
TV CD
USB DAC
OPT 1 OPT 2 COAX
TUNER
BLUETOOTH
NET
SLEEP SP A/B
AM
P
PHONO
LINE
1 L
INE
2
TV
CD
USB DA
C
OPT
1 O
PT 2
COAX
TUNER
BLUETOOTH
NE
T
SLEEP
SP A/B
Each time it is pressed, it switches between the speakers in the order A, B, A+B, Off. You can check which
speakers are selected on the front display.
(
A: Outputs from the speakers connected to the A jacks.
(
B: Outputs from the speakers connected to B jacks.
(
A+B: Outputs from both the A and B jacks. Use this setting when connected with bi-wiring.
(
Off: No output from speakers connected to the A or B jacks.
NOTE
(
This operation can be done also with SPEAKERS on the front panel.
(
Regardless of the speaker selection, audio is always output to the PRE OUT jacks.
(
If the speakers are bi-wired, select A+B.
(
When headphones are connected, no audio is output from the speakers or PRE OUT jacks.
50
PLAYBACK > Basic operations