User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
Item Setting Value or Display Description
Status
Not available
Displayed if YPAO measurements are not
reflected in speaker settings.
Available
Displayed if YPAO measurements are reflected in
speaker settings.
YPAO
On/Off
Selects whether to reflect YPAO measurements
in speaker settings.
Subwoofer
Use/Do not use Sets whether to use/not use subwoofer.
Speakers
Full Band/Low Cut
Sets the frequency bandwidth output to the left/
right speakers. If you select low frequency cut,
the configured crossover frequency is applied.
If a subwoofer will not be used, the setting
cannot be made.
Crossover
40 Hz to 200 Hz
Sets the speaker and subwoofer crossover
frequencies.
If a subwoofer will not be used, the setting
cannot be made.
Distance
L
0.30 m to 24.00 m
(0.05 m steps)
Sets the distance from the listening position to
each speaker individually so the sound from
each of them reaches you at the same time.
R
SW
Level
L
-10.0 dB to +10.0 dB
(0.5 dB steps)
Sets speakers individually so the volume from
each sounds the same at the listening position.
R
SW
EQ
On/Off
Sets whether to use/not use an equalizer based
on YPAO measurements.
YPAO Volume
On/Off
When “YPAO Volume” is set to “On”, the balance
between the bass and treble ranges is adjusted
automatically in conjunction with the volume,
which allows you to enjoy a natural sound
quality balance, even at low volumes.
NOTE
If you will use a subwoofer, install it before running YPAO measurements to ensure a smooth connection between the bass and
midrange. If you feel the volume of the bass is too loud or low, adjust to the desired volume with “SW” of “Level” item.
Related links
“Registering with the MusicCast network”(p.41)
49
PREPARATION > Automatic adjustment of speaker settings (YPAO)