User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
Connecting speakers
Connecting speakers
Use speaker cable (commercially available) to connect speakers to the product.
NOTICE
(
Model for Asia
(
Use the speakers with an impedance of at least 6-ohm.
(
When connecting 2 sets of speakers (SPEAKERS A and SPEAKERS B), use the speakers with an impedance of at least 12-ohm.
(
Models for other areas
(
Use the speakers with an impedance of at least 4-ohm.
(
When connecting 2 sets of speakers (SPEAKERS A and SPEAKERS B), use the speakers with an impedance of at least 8-ohm.
ANALOG IN
LINE 1
OPTICAL COAXIAL
USB
LINE 2
GND
2
NETWORK
12V 0.1A
1
L
DIGITAL IN
TRIGGER
OUT
R
CD
LR
PRE OUT
LR
SUBWOOFER
OUT
SPEAKER S R CH
A
B
SPEAKER S L CH
A
B
ANTENNA
FM
75
PHONO
LR
+ – – ++ – – +
+
Rear panel
Speaker A
(Right channel)
Speaker A
(Left channel)
Speaker B
(Right channel)
Speaker B
(Left channel)
1 Peel off about 10 mm of insulation on the end of the speaker cable and twist its
core tightly.
10 mm
10 mm
(3/8”)
27
PREPARATION > Connecting speakers