User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
NAMES OF PARTS AND THEIR FUNCTIONS
Unit
Front panel
The following are the names of parts on the front of the unit and an explanation of their functions.
PHONES
YPAO MIC
SPEAKERS
METER INPUT
BASS TREBLE BALANCE LOUDNESS
VOLUME
FLAT
-30dB
PURE DIRECT
PRESET
RETURN
CONNECT
PUSH
-
ENTER
SELECT
LEFT
-50 -40 -30 -20 -10 -0 +6
0.01POWER
OFF
PEAK
VU
DIMMER
dB
0.1 1 10 100
W/8
RIGHT
-50 -40 -30 -20 -10 -0 +6
0.01POWER
dB
0.1 1 10 100
W/8
L R
fed r
g
i
o q s tpjk l m n
c
a
b
h
a
z (Power) Switch/Indicator
Turns this product ON/OFF (p.39).
When the switch is up:
The power is ON or in Standby. Pressing the zAMP key on the remote control switches the power between ON and
Standby. This product also goes into Standby in the following situations.
(
When the Auto Power Standby function is activated (p.105)
When the switch is down:
The power is OFF. This product cannot be operated with the remote control. This product cannot also be linked with
a Bluetooth device, a network device, or MusicCast Controller App.
The indicator lights up as follows according to the state of power.
Power ON: Indicator lights up.
Power in Standby: Indicator is faintly lit.
Power OFF: Indicator is off.
NOTE
When the indicator is flashing, it means the protective circuit has been activated and the power will not turn ON, in order to
protect the product. Please contact an authorized Yamaha service center to have it repaired.
b
LEFT/RIGHT Meters
These indicate the audio output levels for the LEFT & RIGHT channels.
12
NAMES OF PARTS AND THEIR FUNCTIONS > Unit