User Manual
Table Of Contents
- TABLE OF CONTENTS
- BEFORE USE
- NAMES OF PARTS AND THEIR FUNCTIONS
- PREPARATION
- PLAYBACK
- Basic operations
- Adjusting the sound to your preference
- Listening to TV audio
- Listening to the radio
- Playing via a Bluetooth® connection
- Listening to music via AirPlay
- Listening to internet radio
- Listening to streaming services
- Playing songs on media servers (PC/NAS)
- Playing audio from your computer (USB DAC)
- Option menu (settings for each input source)
- Basic operation of the Option menu
- List of Option menu
- Correcting volume difference between input sources
- Displaying audio signal information
- Setting the reception mode (stereo/mono) for FM radio
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Setting volume interlock with this product when playing an AirPlay/Bluetooth device
- Setting auto playback
- Setting repeat playback
- Setting shuffle playback
- Improving intermittently disrupted sound from digital audio inputs
- USEFUL FUNCTIONS
- SETTINGS
- UPDATING
- TROUBLESHOOTING
- If you think there is a problem
- If you think there is a problem, the 1st step is checking the following
- Power, system, and/or remote control problems
- Problems with the audio
- Problems with TV (HDMI) connections
- Problems with FM radio
- Problems with DAB radio
- Problems with USB DAC
- Network problems
- Problems with Bluetooth
- Errors shown on the front display
- If you think there is a problem
- APPENDIX
Problems with the audio
No sound
(
A different input is selected.
Use the input source selection key to select the correct input. For more details, refer to the following.
(
“Selecting an input source”(p.51)
(
The product is receiving an input signal that it cannot play.
This product cannot play some digital audio formats. Make sure the signal is in a format that this product
can play. See the following for the supported file formats, HDMI audio formats, and supported codec
formats.
(
“Supported file formats on this product (network)”(p.137)
(
“Specifications”(p.141)
(
A cable connecting this product and an audio device is damaged.
If you check the connections and they seem fine, replace the cable with a different one.
(
The output speakers are not set correctly.
Press the SP A/B key to turn on the speaker output corresponding to the jacks that the speaker is
connected to. For more details, refer to the following.
(
“Selecting the output speakers”(p.50)
If using an external amp, check its connections and power.
(
The audio is muted.
Press the MUTE key to cancel muting.
(
Headphones are plugged into the PHONES jack.
Unplug the headphones.
(
This product was put into Standby by the Auto Power Standby function.
Set “Auto Power Stdby” to “Off” from the Setup menu. For more details, refer to the following.
(
“Configuring auto power standby”(p.105)
Volume cannot be increased
(
The maximum volume is set too low.
Adjust the maximum with “Max Volume” on the Setup menu. For more details, refer to the following.
(
“Configuring the volume”(p.104)
(
The power of the external device connected to the output jacks of this product is OFF.
Turn all corresponding devices ON.
(
The volume interlocks between each device and this product have not been configured for
Bluetooth/AirPlay playback from a Bluetooth device or AirPlay device.
Configure the volume interlocks of each device via “Volume Interlock” on the Option menu. For more
details, refer to the following.
(
“Setting volume interlock with this product when playing an AirPlay/Bluetooth device”(p.83)
(
LOUDNESS is set too low.
First, lower the volume with VOLUME, then return LOUDNESS to the FLAT position and readjust the
volume.
119
TROUBLESHOOTING > If you think there is a problem