Owner`s manual

Input channels

Reference Manual

INPUT DELAY window (8ch)

You can set the on/off status and the value of the input channel delay.

1 DELAY SCALE button

Press the button to display the DELAY SCALE window, in which you can select the unit

for the delay time.

There are four delay scales: meter (meter/sec), feet (feet/sec), sample (number of

samples), and ms (millisecond).

2 Channel select button

The currently-selected input channel is indicated in blue. Press the button to select the

channel.

3 Delay setting knob (input channels only)

Use the [TOUCH AND TURN] knob to set the delay value. You can view the current value

immediately above the knob (always shown in unit of ms) and below the knob (shown

using the currently-selected scale). If ms (millisecond) has been selected for the DELAY

SCALE, nothing will appear above the knob.

4 DELAY ON button

Switches the delay on or off.

5 Tabs

Enable you to switch between windows.

6 Close button

Closes the window.

INPUT DELAY (CH1–32, CH33–64/ST IN (QL5), ST IN (QL1))

1 DELAY SCALE button

Press the button to display the DELAY SCALE window, in which you can select the unit

for the delay time.

2 Channel select button

Lights to indicate the currently-selected input channel. Press the button to select the

channel.

3 Delay setting knob (input channels only)

Use the [TOUCH AND TURN] knob to set the value. You can view the current value

immediately beside the knob (always shown in unit of ms) and below the knob (shown

using the currently-selected scale).

NOTE

If ms (millisecond) has been selected for the DELAY SCALE, nothing will appear to the right of

the knob.

1 6