manual

Graphic EQ, Parametric EQ, effects, and Premium Rack

V5 Reference Manual

139

G OFFSET gain knob

If a frequency is at a low level, its analysis results might not appear clearly in a graph.

The addition of offset gain allows better visibility in graphs for such results. You can

adjust this gain from 0dB to +30dB.

NOTE

The value for this parameter is applied identically to the RTA METER window, HPF/EQ window,

GEQ window, and PEQ window.

PEQ EDIT window (8PEQ)

1 BYPASS button

You can bypass each band.

When the BYPASS button is on, the Q, FREQUENCY, and GAIN knobs for that band turn

gray.

2 HPF/LPF NOTCH button

Press this button to switch to the screen for operating HPF/LPF/notch filters.

3 EQ parameter setting knobs

Indicates the Q, FREQUENCY, and GAIN parameters for the BAND1 - BAND8 bands. You

can use the [TOUCH AND TURN] knob to adjust this.

PEQ EDIT window (HPF/LPF NOTCH)

1 Attenuation select button

There are four types of HPF and LPF. This button switches the attenuation per octave

between -24 dB/oct, -18dB/oct, -12 dB/oct, and -6dB/oct.

2 8PEQ button

Press this button to switch to the screen for operating the 8-band PEQ.

3 HPF/LPF frequency knob

This knob is used to adjust the HPF/LPF frequency.

4 ON button

There is an ON button for the HPF, LPF, and each of the three notch filters.

313

4 6

54 654 65