User Manual

Recording Your Performance
PSR-I500 Owner’s Manual
39
Quick Guide
3
Same as in steps 4 to 6 (page 37) in
“Quick Recording.”
Yo u can clear all tracks of a User Song.
1
Press the [SONG] button, then select the
User Song from 061–070 (User 1–10) to
be cleared.
2
Hold down the track [1/RIGHT] and [A]
buttons simultaneously for longer than a
second.
A confirmation message will appear on the dis-
play.
3
Press the [+/YES] button.
A confirmation message will appear on the dis-
play. To cancel this operation, press the [-] button.
4
Press the [+/YES] button to clear the
Song.
An in-progress message will appear briefly on the
display.
This lets you clear individual tracks from a User
Song.
1
Press the [SONG] button, and then
select the desired User Song from 061–
070 (User 1–10).
2
From [1/RIGHT]–[5] and [A], press the
Track button to be cleared for longer
than a second.
A confirmation message will appear on the dis-
play.
3
Press the [+/YES] button.
A confirmation message will appear on the dis-
play. To cancel this operation, press the [-] button.
4
Press the [+/YES] button to clear the
track.
An in-progress message will appear briefly on the
display.
• If the memory becomes full while recording, an alert mes-
sage will appear and recording will stop automatically. In
this case, delete unnecessary data by using the Clear
functions (below), and then execute the recording again.
Clearing a User Song
NOTE
Hold simultaneously
for longer than a second.
ClrUser1
YES
Clearing a Specified Track from
a User Song
Hold for longer
than a second.
ClrTr1
YES