User Manual

USB Flash Drive Operations
PSR-E473, PSR-EW425 Reference Manual
23
Saving Samples to USB Flash
Drive
1
Press the QUICK SAMPLING [A]–[D]
pads to confirm which pads contain the
samples you want to save.
2
While holding down the [SHIFT] button,
press the [FUNCTION] button to call up
the File Control display.
“SaveSMPL” is shown on the display.
3
Press the [ENTER] button.
“PressA-D” is shown on the display.
4
Press the QUICK SAMPLING pad that
contains the sample you want to save.
If you pressed a pad that doesn’t contain a sam-
ple, “NoData” is shown on the display. In that
case, reselect a pad.
5
Select a file to save by rotating the dial.
• SMPL001 – SMPL250
6
Press the [ENTER] button again.
“SaveOK?” is shown on the display. Press the
[EXIT] button to return to step 2 above without
saving.
7
Press the [ENTER] button again to exe-
cute the save operation.
“Saving” is briefly shown on the display and the
sample is saved.
8
Press the [FUNCTION] button to exit
from the File Control display.
• If the instrument is in the Quick Sampling mode, press the
[CAPTURE] button to exit from the mode, and then follow
the steps below.
Overwriting existing files
When a file selected for saving already con-
tains data, “Overwrt?” appears on the display.
IMPORTANT
SaveSMPL
Keep holding down.