User Manual

Let’s enjoy playing the keyboard !
PSR-E360 Owner’s Manual
12
Record your performance as a User Song (Song number 113, up to
approx. 300 notes), which can then be played back on the instrument.
1 Select the desired Voice.
Apply sustain (page 9) or effect (page 21) to the sound as desired before start-
ing recording.
2 Press [PHRASE REC] y to enter the Record mode.
To exit from the Record mode, press this button again.
3 Play the keys in the Record mode to start the recording.
4 Stop the recording by pressing the [>/] (Start/Stop) !5.
5 To listen to the recorded Song and stop the playing, use [>/].
Recording
1 Turn off the power for both the external audio device and this instru-
ment.
2 Connect the audio device to the
instrument’s [AUX IN] jack @4.
Use an audio cable with no resis-
tance having a stereo-mini plug on
one side for connecting to this
instrument, and a proper plug to
match the output jack of the exter-
nal audio device on the other side.
3 Turn on the audio device, and then
this instrument.
4 Start play back of the connected
audio device.
The sound of the audio device is
output through the speakers of this
instrument.
5 Stop playback of the audio device.
• When turning off the power, first turn off the power to the instrument, and then to the
external device to avoid damage to the devices.
Playing an External Audio Device with the Built-in
Speakers
Stereo-mini
plug
Audio device
(portable audio player, etc.)
NOTICE
Initialization
This operation initializes the backup parameters and the User Song. While holding down the highest white key, press the [ ] (Standby/On) switch to turn the
power on.