User Manual

PSR-E360 Owner’s Manual
32
Reference
The Functions
The Functions settings provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices and
Effects.
1
Press the [FUNCTION] button
several times until the desired
item appears.
Each time the [FUNCTION] button is
pressed, the Function number increases
one by one. To decrease the Function
number by one, simultaneously hold
down the [FUNCTION] button and press
the [-] button briefly. Simply pressing only
the [+] or [-] button does not change the
Function number.
After a few seconds, the Function name
may be replaced with the setting value
depending on the selected Function.
2
Set the value by using the number buttons [0]–[9] or [+]/[-] but-
tons.
3
To exit the Function settings, press one of these buttons:
[SONG], [VOICE] or [STYLE].
Function List
• The Function number does not appear in the display during Song, Style or metronome
playback. The beat value appears instead.
StyleVol
100
001
Press several times
as necessary
Current value Function name
Function number
NOTE
Direct numeric entry.
• Increment value by 1.
•Yes
•On
Press simultaneously to recall
the default setting.
• Decrement value by 1.
•No
•Off
Function Number Function name Display Range/Settings
Default
Value
Descriptions
Volum e
001 Style Volume StyleVol 000–127 100 Determines the volume of the Style (page 26).
002 Song Volume SongVol 000–127 100 Determines the volume of the Song (page 19).
Overall
003 Transpose Transpos -12–12 0 Determines the pitch of the instrument in semitone increments.
004 Tuning Tuning 427.0Hz–453.0Hz 440.0Hz Determines the fine tuning of the pitch of the entire instrument in approx. 0.2Hz increments.
005 Split Point SplitPnt 036–096 (C1–C6) 54 (F#2)
Determines the Split “point”—in other words, the key that separates the auto accompaniment range and
Voice.
006 Touch Response TouchRes 1 (Soft), 2 (Medium), 3 (Hard), 4 (Fixed) 2 (Medium) Determines the Touch Response (page 16).