User Manual

PSR-E360 Owner’s Manual

Playing Songs

Reference

When playback reaches to the point you want to specify as the

end point, press the [A B] button again to set the B point.

The specified A-B section of the song will now play repeatedly.

To cancel repeat playback, press the [A B] button.

To stop playback, press the [>/] (Start/Stop) button.

Changing the Melody Voice

You can change a Song’s melody Voice to any other desired Voice.

Select a Song.

Select the desired Voice.

Hold down the [VOICE] button for longer than a second.

“SONG MELODY VOICE” appears in the display for a few seconds, and the

selected Voice replaces the Song’s original melody Voice.

Turning Each Part On/Off

As indicated above the panel buttons (shown below), a Song consists of two

Parts, which can be turned on or off individually by pressing the corresponding

button, [L] or [R].

By turning the left- and right-hand parts on or off during playback, you can listen

to the Part (that is turned on), or practice the other part (that is turned off) on the

keyboard.

• You can also set the A-B Repeat function when the Song is stopped. Simply use the [

]

(Fast Reverse) and [

] (Fast Forward) buttons to select the desired measures, pressing

the [A B] button for each point, then start playback.

• If you want to set the start point “A” at the top of the Song, press the [

] button before

starting playback.

• If you want to set end point "B" to the end of the Song, specify only the A point and play

back the Song to the end.

• The A-B Repeat function will be canceled when you select another Song.

• Selecting another Song will cancel the changed Melody Voice.

• You cannot change the melody Voice of a User Song.

NOTE

• Selecting another Song will cancel the on/off status of the Parts.

010

Voglein

043

Lit: Track contains data

Unlit: Track is muted or con-

tains no data

NOTE