Owner`s manual

PSR-E333/YPT-330 Owner’s Manual
41
Function Settings
The [FUNCTION] button gives you access to a variety of operations related to adjusting
or enhancing the sound and making settings for connection to external devices.
For more about the available functions, see the following Function Setting List.
1
Press the [FUNCTION] button a number of times until the
desired item appears.
Each time the [FUNCTION] button is pressed, the Function number increases
one by one.
You can also decrease the Function number by one when you press the [-] but-
ton briefly while holding down the [FUNCTION] button.
If the Function includes sub-modes, the Function item appears in the display for
a few seconds, and the sub-modes will be displayed.
2
Set the value by using the number buttons [0]–[9], [+], [-].
Function Setting List
Select the item and change the value
• The Function number will
not appear in the display
during Song, Style or metro-
nome playback. The mea-
sure will appear instead.
NOTE
001
StyleVol
100
Value Function item
Function number
• Some Function settings are
stored in memory as soon as
they are changed. See “The
Backup Parameters” on
page 40 for information on
the Function settings that
are stored on the instrument.
• To exit the Function settings,
press one of these buttons;
[SONG], [VOICE],[STYLE]
or [GRAND PIANO].
NOTE
Direct numeric entry.
• Decrement value by 1.
• No
• Off
• Increment value by 1.
• Yes
• On
Press simultaneously to
recall the default setting.
No. Item Display
Range/
settings
Default
setting
Description
Volume
001 Style Volume StyleVol 000–127 100 Determines the volume of the Style.
002 Song Volume SongVol 000–127 100 Determines the volume of the Song.
Overall
003 Transpose Transpos -12–00–12 00
Determines the pitch of the instrument in semitone increments.
NOTE: The pitch of the Drum Kits Voices cannot be changed.
004 Tuning Tuning
427.0–453.0
(Hz)
440.0 (Hz)
Determines the fine tuning of the pitch of the entire instrument
in approx. 0.2Hz increments.
NOTE: The pitch of the Drum Kits Voices cannot be changed.
005 Split Point SplitPnt
000–127
(C-2–G8)
54 (F#2)
Determines the highest key for the Split Voice and sets the Split
“point”—in other words, the key that separates the Split (lower)
and Main (upper) Voices. The Split Point setting and Accompani-
ment Split Point setting are automatically set to the same value.
006 Touch Sensitivity TouchSns
1 Soft
2 Medium
3 Hard
2 Medium
When Touch Response is on, this determines the sensitivity of
the feature. Higher values produce greater (easier) volume
variation in response to keyboard dynamics.