Owner`s manual
Record Your Own Performance
PSR-E333/YPT-330 Owner’s Manual
38
Selecting a specific track for recording
1
Turn ACMP (auto accompaniment) on or off, depending on what
you want to record.
If you want to record Style playback, turn ACMP on. If you want to record only
your own keyboard performance, turn ACMP off.
2
Specify the track you want to record.
Specify Track 2 when you want to record the Style.
When you want to record your own keyboard performance, you can specify
either track.
Recording to Track 1
While holding the [REC] button, press the [REC TRACK 1] button.
Recording to Track 2
While holding the [REC] button, press the [REC TRACK 2] button.
3
Press the [+], [-] buttons to select the User Song you want to
record.
If you want to record Style playback to Track 2, press the [STYLE] button and
select the desired Style.
4
Start recording
Perform steps 2 and 3 on pages 36–37.
By playing keys to the left of the Split Point when auto accompaniment is set to
on, the Style starts sounding and is recorded. Only your performance is recorded
by playing the keyboard (any key is OK) when auto accompaniment is set to off.
• Keep in mind that both
Tracks 1 and 2 will be over-
written with new data if you
record without specifying
the tracks.
• The both “L” and “R”
flashes, this indicates that
you have specified Track 1
when auto accompaniment
is on. If you want to record
your own performance,
press the [TRACK 2] button
to stop the “L” flashing. If you
want to record a Style, press
the [REC] button to cancel
the recording, and repeat
the procedure from the
beginning.
NOTE
User 1
rEC
001
Press simultaneously
Flashes when Track 1 is
selected for recording.
User 1
rEC
001
Press simultaneously
Flashes when
track 2 is selected
for recording.
Lights when recorded data exists.
Turns off when there is no
recorded data, or when Mute
is set to on (page 34) to turn off
playback of the track.
• If you want to record only the
rhythm (percussion) part,
press the [START/STOP]
button to play just the
rhythm, then add the section
change by pressing the
[INTO/ENDING/rit.] button or
[MAIN/AUTO FILL] button.
• You can record a new track
while listening to a previ-
ously recorded track (the
track indication will appear).
You can also mute recorded
tracks (the track will disap-
pear) while recording a new
track by pressing the
desired track button.
NOTE
User 3
rEC