Owner`s manual

Playing Songs
PSR-E333/YPT-330 Owner’s Manual
26
Press the [DEMO] button.
Songs 001, 002, 003 play in sequence, and playback will continue repeatedly starting again from the first Song
001.
You can stop playback at any time by pressing the [DEMO] or [START/STOP] button.
With the default setting only a few of the internal songs are played back and repeated when the [DEMO/BGM]
button is pressed. This setting can be changed so that all internal songs are played, or all songs transferred to the
instrument from a computer are played.
Four playback group settings are provided. Simply select the one that suits your needs.
1
Press and hold the [DEMO/BGM] button for longer than a sec-
ond.
“DemoGrp” will appear in the display for a few seconds, then the currently
selected repeat playback target will be displayed.
2
Use the [+] or [-] button to select a repeat playback group from the
table below.
3
Press the [DEMO/BGM] button.
The songs in the group selected play in sequence.
You can stop playback at any time by pressing the [DEMO] or [START/STOP]
button.
Listening to the Demo Songs
BGM Playback
• You can also set the demo
group in the Function set-
tings (page 43 Function
037).
NOTE
Hold for longer than a second.
• When User songs and
Download songs data do
not exist, Demo songs are
played back.
NOTE
Demo Preset songs (001–003)
Preset All preset songs (001–102)
User All User songs (103–107)
Download All songs transferred from a computer (108–)
• You can select a song by
using the [+] button after
pressing the [DEMO/BGM]
button. The [-] button can be
used to go back to the
beginning of the selected
song.
NOTE
Random Song Playback
The Random Play mode causes the songs in the group selected for BGM playback to be played back in random
order. (Demo group Songs [Preset Songs 001–003] cannot be played at random.)
The setting of the Random Play mode can be set in the Function settings (page 43 Function 038).