User Manual

Table Of Contents
PSR-A5000 Reference Manual 107
10
Controller Function Settings
Registration Registration
Memory
Same as the REGISTRATION MEMORY [MEMORY] button.  -
Registration
Memory1–8
Same as the REGISTRATION MEMORY [1]–[8] buttons.  -
Registration
Sequence +/-
Advances/reverses through the Registration Sequence. - -
Registration Bank
+/-
Same as the REGIST BANK [+]/[-] buttons.  -
Registration Freeze
On/Off
Same as [On]/[Off] on the Registration Freeze display (page 85).  -
Registration
Sequence On/Off
Same as [On]/[Off] on the Registration Sequence display (page 86).  -
Live
Control
Live Control Knob
Assign
Same as the LIVE CONTROL [ASSIGN] button.  -
Live Control
Joystick Assign
Joystick Assign Types (1–3) can be switched in sequence by pressing a
controller to which this function is assigned. For details, refer to the
Owner’s Manual.

Live Control
Joystick Hold On/
Off
(Control Type)
Same as the [JOYSTICK HOLD] button.  -
Live Control Reset
Val ue
Same as [Reset Value] on the Live Control display (page 111). Resets the
values of all the assignable functions of Live Control.
 -
Chord
Looper
Chord Looper On/Off
Same as the CHORD LOOPER [ON/OFF] button.  -
Chord Looper Rec/Stop
Same as the CHORD LOOPER [REC/STOP] button.  -
Style Style Start/Stop Same as the STYLE CONTROL [START/STOP] button.  -
Synchro Start On/
Off
Same as the [SYNC START] button.  -
Synchro Stop On/
Off
Same as the [SYNC STOP] button.  -
Intro1–3 Same as the INTRO [I]–[III] buttons.  -
Main A–D Same as the MAIN VARIATION [A]–[D] buttons.  -
Fill Down Plays a fill-in, which is automatically followed by the Main section of the
button on the immediate left.
 -
Fill Self Plays a fill-in.  -
Fill Break Plays a break.  -
Fill Up Plays a fill-in, which is automatically followed by the Main section of the
button on the immediate right.
 -
Ending1–3 Same as the ENDING/rit. [I]–[III] buttons.  -
Acmp On/Off Same as the [ACMP] button.  -
OTS Link On/Off Same as the [OTS LINK] button.  -
Auto Fill In On/Off Same as the [AUTO FILL IN] button.  -
Half Bar Fill In
(Control Type)
Controls the “Half bar fill-in” function according to the Control Type, so
that changing sections of a Style at the first beat of the current section
starts the next section from the middle with an automatic fill-in.

Functions
Assignability
Category Function Description P A S
If you want to use a pedal, set the “Pedal Control” on the Registration Sequence display
(page 86).
NOTE