User Manual
Table Of Contents
- Introduction
- Audio Components
- The Difference Between Mono, Stereo, and Multi
- How to Control Control Signals
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Control (AGC)
- Combiner
- Room Combiner/Room Combiner plus Automixer
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- Combiner parameter setting window (Room Combiner)
- Combiner parameter setting window (Room Combiner plus Automixer)
- Control
- Control
- Dugan Automixer window (Room Combiner plus Automixer)
- Room Combiner/Room Combiner plus Automixer
- DCA
- Delay
- Dynamics
- REV-X
- EQ
- Fader
- Feedback Suppressor
- Filter
- Input/Output
- Meter
- Mixer
- Oscillator
- Polarity
- Probe
- Router
- Source Selector
- Speaker Processor
- Control Components
- Control Methods for Control Components
- Trigger
- Button (Normalized Value)
- Button (Value)
- Radio Button (Normalized Value)
- Radio Button (Value)
- Fader (Normalized Value)
- Fader (Value)
- Processing
- Logic (Normalized Value)
- NOT (Normalized Value)
- Flip-Flop (Normalized Value)
- Invert (Normalized Value)
- Compare (Normalized Value)
- Difference (Normalized Value)
- Max/Min (Normalized Value)
- Negate (Value)
- Compare (Value)
- Multi Compare (Value)
- Difference (Value)
- Max/Min (Value)
- Delay
- External Events
- Suspend
- Router
- Other
- GPI In
- GPI Out
ProVisionaire Design DME7 Component Guide
89
• [-3dB]
Sets the cross-point send level to –3 dB.
• [-6dB]
Sets the cross-point send level to –6 dB.
• [Minimum]
Sets the cross-point send level to −∞ dB.
• [Input Channel (Rows)]
● This is the setting for the horizontal axes of the matrix.
● On: Turn all of the horizontal axes ON.
● Off: Turn all of the horizontal axes OFF.
● Nominal/–3 dB/–6 dB/Minimum: Sets the horizontal axis send level to
Nominal, –3 dB, –6 dB, or Minimum.
● Copy: Copies the horizontal axis settings (both delay time and send level).
● Paste: Pastes the copied contents into a different horizontal axis.
• [Output Channel (Columns)]
● This is the setting for the vertical axes of the matrix.
● On: Turn all of the vertical axes ON.
● Off: Turn all of the vertical axes OFF.
● Nominal/–3 dB/–6 dB/Minimum: Sets the vertical axis send level to Nominal,
–3 dB, –6 dB, or Minimum.
● Copy: Copies the vertical axis settings (both delay time and send level).
● Paste: Pastes the copied contents into a different vertical axis.
• [All]
Either turns all sends OFF, or sets all send levels to ‒∞ dB (Minimum).
• [Display]
The display can be changed to a bar graph. The upper limit for the display can be
selected from 50 ms/250 ms/500 ms/1000 ms.