User Manual

ProVisionaire Design DME7 Component Guide
63
c [⌀] button
Specifies whether the phase of the output signal of each channel is inverted. If you click
the button to make it light, the phase of that channel’s output signal is inverted.
d
Fader
This adjusts the output level of each channel. You can right-click the fader to access the
context menu, and select [0 dB] or [-Infinity].
e Port name
Shows or edits the port name. This is linked with the “Label” of the component’s ports.
Control
Parameter types of the input/output values for each Port
Input Value Control Parameter Output Value
Type Range Input Port Name Parameter Range Output Port Name Type Range
Value dB
−∞–
10.00
●
Level Ch1 −∞–10.00
●
Level Ch1 Value dB
−∞–
10.00
Normalized
0.00–
1.00
Value Num 0,1
●
On Ch1 OFF:0, ON:1
●
On Ch1 Value Num
OFF:0,
ON:1