User Manual
Table Of Contents
- Introduction
- Audio Components
- The Difference Between Mono, Stereo, and Multi
- How to Control Control Signals
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Control (AGC)
- Combiner
- Room Combiner/Room Combiner plus Automixer
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- Combiner parameter setting window (Room Combiner)
- Combiner parameter setting window (Room Combiner plus Automixer)
- Control
- Control
- Dugan Automixer window (Room Combiner plus Automixer)
- Room Combiner/Room Combiner plus Automixer
- DCA
- Delay
- Dynamics
- REV-X
- EQ
- Fader
- Feedback Suppressor
- Filter
- Input/Output
- Meter
- Mixer
- Oscillator
- Polarity
- Probe
- Router
- Source Selector
- Speaker Processor
- Control Components
- Control Methods for Control Components
- Trigger
- Button (Normalized Value)
- Button (Value)
- Radio Button (Normalized Value)
- Radio Button (Value)
- Fader (Normalized Value)
- Fader (Value)
- Processing
- Logic (Normalized Value)
- NOT (Normalized Value)
- Flip-Flop (Normalized Value)
- Invert (Normalized Value)
- Compare (Normalized Value)
- Difference (Normalized Value)
- Max/Min (Normalized Value)
- Negate (Value)
- Compare (Value)
- Multi Compare (Value)
- Difference (Value)
- Max/Min (Value)
- Delay
- External Events
- Suspend
- Router
- Other
- GPI In
- GPI Out
ProVisionaire Design DME7 Component Guide
28
f
[ROOM OUT]
Adjusts the ROOM OUT level and turns mute on/off.
Combiner parameter setting window (Room Combiner plus Automixer)
This mixes [LOCAL IN], [BGM], and [PAGING] with each room’s mic inputs that have been
auto-mixed and output by the Dugan Automixer. Here you can view and edit the parameters
of all rooms.
When rooms are connected, [LOCAL IN] can be adjusted for each room; however, the setting
of the lowest-numbered room takes priority for parameters other than [LOCAL IN].
a Index
Shows the number and color assigned to the room. Connected rooms are shown in the
same color.
b [NAME] box
Indicates the room name. You can double-click the name and edit it.
c [MICS.]
Adjusts the send amount from the Dugan Automixer to ROOM OUT, and turns mute
on/off.
d [PAGING]
Adjusts the send amount from PAGING to ROOM OUT, and turns mute on/off.