User Manual

ProVisionaire Design DME7 Component Guide
13
Offset. If the microphone connected to MIC1 cannot be placed at the closest position to
the speaker, the FE Delay will be set appropriately by setting the Delay Offset.
How to set Delay Offset
1. Measure the distance to the microphone connected to MIC1.
2. Measure the distance to the microphone placed closest to the speaker (MIC2 in
this case).
3. Calculate the difference between those 2 distances, and use the time
information converted into a value using the formula below as the value to
input into the Delay Offset.
Time (msec) = Distance (m) ÷ 340 (m/s) × 1,000 (Speed of sound defined as 340 m/s)
Control
Parameter types of the input/output values for each Port
Input Value Control Parameter Output Value
Type Range Input Port Name Parameter Range Output Port Name Type Range
Value dB
−∞–
10.00
●
Ref Gain −∞–10.00
●
Ref Gain Value dB
−∞–
10.00
Normalized
0.00–
1.00
Value Num
0,1
●
Mic On Mic1 OFF:0, ON:1
●
Mic On Mic1 Value Num
0,1
Value dB
−∞–
10.00
●
Mic Gain Mic1 −∞–10.00
●
Mic Gain Mic1 Value dB
−∞–
10.00
Normalized
0.00–
1.00
Value Num 0,1,2,3
●
Mic Effect Mic1 Soft:0 Midium:1 Hard:2 Custm:3
●
Mic Effect Mic1 Value Num 0,1,2,3
Value Num 0,1,2,3,4
●
Mic NR Mic1 0:0, 1:1, 2:2, 3:3, 4:4
●
Mic NR Mic1 Value Num 0,1,2,3,4
- - - - - −∞–10.00
●
ERL Mic1 Value dB
−∞–
10.00
- - - - - −∞–10.00
●
ERLE Mic1 Value dB
−∞–
10.00