User Manual
Table Of Contents
- Introduction
- Audio Components
- The Difference Between Mono, Stereo, and Multi
- How to Control Control Signals
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Control (AGC)
- Combiner
- Room Combiner/Room Combiner plus Automixer
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- ■ “Room Combiner” component editor/”Room Combiner plus Automixer” component editor
- Combiner parameter setting window (Room Combiner)
- Combiner parameter setting window (Room Combiner plus Automixer)
- Control
- Control
- Dugan Automixer window (Room Combiner plus Automixer)
- Room Combiner/Room Combiner plus Automixer
- DCA
- Delay
- Dynamics
- REV-X
- EQ
- Fader
- Feedback Suppressor
- Filter
- Input/Output
- Meter
- Mixer
- Oscillator
- Polarity
- Probe
- Router
- Source Selector
- Speaker Processor
- Control Components
- Control Methods for Control Components
- Trigger
- Button (Normalized Value)
- Button (Value)
- Radio Button (Normalized Value)
- Radio Button (Value)
- Fader (Normalized Value)
- Fader (Value)
- Processing
- Logic (Normalized Value)
- NOT (Normalized Value)
- Flip-Flop (Normalized Value)
- Invert (Normalized Value)
- Compare (Normalized Value)
- Difference (Normalized Value)
- Max/Min (Normalized Value)
- Negate (Value)
- Compare (Value)
- Multi Compare (Value)
- Difference (Value)
- Max/Min (Value)
- Delay
- External Events
- Suspend
- Router
- Other
- GPI In
- GPI Out
ProVisionaire Design DME7 Component Guide
11
g
[GAIN] knob
Sets the Reference gain.
h [Advanced Settings] window open button
Shows the Advanced Settings window.
Advanced Settings window
Mic. 1–16
[LINEAR AEC] knob / [ECHO SUPP] knob
These two are echo canceling functions that use different methods. As the numeric value
is increased, more echo cancellation is performed, but if it is raised too high, each one
will cause a different type of negative effect. Therefore, it is necessary to understand
their negative effects and maintain a balance of the two to keep the settings within a
necessary and sufficient range.
a [LINEAR AEC] knob
Sets the strength of the echo canceler function. As the strength is increased, more echo
cancellation is performed, but it decreases the double-talk (when near and remote
speakers speak at the same time) performance. (The echo cancellation performance
during double-talk is decreased, and the near speaker's voice may become inaudible.)
This can only be set when Custom has been selected for [AEC EFFECT].
b
[NR] knob
Please set this to a higher value for rooms with a large amount of noise. If the strength is
raised too high, the necessary signals will also be removed, which will decrease the
sound quality of the speaking voices. Please set to the lowest necessary strength.
This can only be set when Custom has been selected for [AEC EFFECT].