Specifications

Recording

16 POCKETRAK 2G Reference Manual

Recording from external audio devices

1. Use an audio cable to connect the stereo microphone socket ( socket) to

the headphones socket on the external autio device.

Note:

· For audio cable, use a 3.5mm stereo mini plug without resistance.

2. While the recorder is stopped, press the MENU/STOP button for at least 2

seconds.

3. Press the Y or T button to select “VOICE”, then press the W button.

4. Press the Y or T button to select “REC SELECT”, then

press the W button.

5. Press the Y or T button to select “LINE”, then press the

W button.

Note:

· If you record audio with an external stereo microphone, select “MIC” (page 6). For

external microphones, Yamaha recommends that you use an electret condenser micro-

phone with the capabilities of plug-in power operation, 2k Ω impedance, performance

guaranteed with a 1.3V power supply, and a 3.5mm stereo mini plug.

6. Press the MENU/STOP button twice to quit the menu setting mode.

7. Press the FOLDER/INDEX button to select the L (Line)

folder.

Even if one of the other folders is selected, audio data will be

recorded in the L folder.

8. Start playback on the external device, then press the

PAUSE/REC button on the recorder to start recording.

To stereo microphone

socket

Audio device

To audio output

headphones socket

To LINE OUT (Recording)

socket