User Guide

Normal (Default) Setting List / Liste der Grundeinstellungen (Default) / Liste des réglages normaux (par défaut) / Lista de ajustes nor-
males (predeterminados)
4
P-250
■ Editing a Voice in Detail [VOICE EDIT]
*1 Each voice and each combination of voices includes the setting.
■ Adjusting the Master Equalizer [MASTER EQ EDIT]
Function Value
Reference page in the
Owner’s Manual
Setting the octave [Octave] *1 65
Setting the volume level [Volume] *1 65
Setting the position of the right and left channels [Pan] *1 66
Adjusting fine pitch offset between two voices in Dual mode [Detune] *1 66
Selecting the reverb type [ReverbType] *1 66
Setting the reverb depth [ReverbSend] *1 66
Setting the chorus type [ChorusType] *1 66
Setting the chorus depth [ChorusSend] *1 67
Tur ning the chorus on/off [ChorusOnOff] *1 67
Selecting the insertion effect type [Ins.Type(Ins)] *1 67
Setting the speed of the vibraphone vibrato effect [VibeRotorSpeed(RotorSpeed)]
*1 67
Tur ning the Vibraphone vibrato on/off [VibeRotorOnOff (RotorOnOff)] *1 67
Adjusting the speed of the rotary speaker [RotarySpeed (Rot.Speed)] *1 67
Adjusting the insertion effect depth [Dry/WetBalance(Dry/Wet)] *1 68
Adjusting the brightness of the sound [Brightness] *1 68
Adjusting the resonance effect [HarmonicContent (Harmonic)] *1 68
Adjusting the low-range frequency of the part EQ [EQ LowFreq.(EQ L.Freq)] *1 68
Adjusting the high-range frequency of the part EQ [EQ HighFreq.(EQ H.Freq)] *1 68
Adjusting the low-range gain (amount of boost/cut) of the part EQ [EQLowGain] *1 68
Adjusting the high-range gain (amount of boost/cut) of the part EQ [EQHighGain] *1 68
Setting the touch sensitivity [TouchSense] *1 68
Assigning the Pedal 1 function [Pedal 1] *1 69
Assigning the Pedal 2 function [Pedal 2] *1 69
Assigning the Pedal 3 function [Pedal 3] *1 69
Assigning the Pedal 4 function [Pedal 4] *1 69
Assigning the modulation wheel function [Modulation] *1 69
Setting the MSB of the Send Bank Select message [SendBankMSB(SendMSB)] *1 70
Setting the LSB of the Send Bank Select message [SendBankLSB(SendLSB)] *1 70
Setting the Program Change message [SendPG#] *1 70
Tur ning the Internal tone generator on/off [InternalTG] *1 70
Function
Value
Reference page in the
Owner’s Manual
Setting the Master Equalizer type Edit 71
Adjusting the low range gain of the Master Equalizer [LowGain] 0dB 71
Adjusting the low-middle range gain of the Master Equalizer [LowMidGain] 0dB 71
Adjusting the middle range gain of the Master Equalizer [MidGain] 0dB 71
Adjusting the high-middle range gain of the Master Equalizer [HighMidGain] 0dB 71
Adjusting the high range gain of the Master Equalizer [HighGain] 0dB 71
Adjusting the low frequency of the Master Equalizer [LowFreq.] 90 Hz 71
Adjusting the low-middle frequency of the Master Equalizer [LowMidFreq.] 315 Hz 71
Adjusting the middle frequency of the Master Equalizer [MidFreq.] 1.1 kHz 71
Adjusting the high-middle frequency of the Master Equalizer [HighMidFreq.] 2.5 kHz 71
Adjusting the high frequency of the Master Equalizer [HighFreq.] 4.0 kHz 71
Adjusting the low range resonance of the Master Equalizer [LowQ] 0.7 72
Adjusting the low-middle range resonance of the Master Equalizer [LowMidQ] 2.4 72
Adjusting the middle range resonance of the Master Equalizer [MidQ] 2.8 72
Adjusting the high-middle range resonance of the Master Equalizer [HighMidQ] 1.8 72
Adjusting the high range resonance of the Master Equalizer [HighQ] 0.7 72