Owner`s manual

13
03 (setting corresponding engine)
You can select the engines that are compat-
ible to this meter. The port outboard motor is
set to “-1- (engine number 1)” and the star-
board outboard motor is set to “-2- (engine
number 2).”
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. (1 second) (2 times): Press to
switch between the setting function
numbers and to switch to the change
settings display.
4. : To switch between the displayed
engine numbers.
5. (1 second): To change the corre-
sponding engine and return to the nor-
mal display.
NOTE:
• The meters are set at the factory to
“-1- (engine number 1).”
• To reset an engine number, see “Reset-
ting engine number” in “Service func-
tions.”
-1- (engine number 1)
-4- (engine number 4)
-3- (engine number 3)
-2- (engine number 2)
03 (setting corresponding engine)