Getting Started Guide

Troubleshooting (in setting up)
12 NUAGE MASTER Getting Started
Troubleshooting
(in setting up)
Power does not turn on
• Is [Power switch] turned on?
• Is the power cable connected to a proper AC outlet?
• Is the power cable plug inserted all the way?
If the power still does not turn on, contact your Yamaha
dealer.
Device is not communicating with
Nuendo
• Is the Ethernet cable connected properly?
• Has “Installing TOOLS for NUAGE” (page 11) already
been completed?
• Has “Configuring the Workgroup on NUAGE” (page 11)
already been completed?
• Have the fire wall settings been set property?
• If a network adaptor for wireless LAN running, disable
the suspected network adaptor.
In the LCD or organic EL display,
there are some black points (unlit)
or white points (always lit)
• These are the result of defective pixels and occasionally
occur in the display; they do not indicate a problem in
operation.
The touch sensitivity of the knob
or fader is too high/low
• Change the touch sensitivity setting referring to
“Adjusting the Touch Sensitivity” (page 13).
The brightness of the button or
touch screen is too bright/dark
• Change the brightness setting referring to “Specifying
the Brightness” (page 14).
Discrepancy occurs on the
detection point of the touch screen
• Change the detection point setting referring to
“Calibrating Detection Point of the Touch Screen”
(page 14).