User manual

NXES104 & NXDT104 TECHNICAL SPECIFICATIONS
NXES104 & NXDT104 TECHNICAL SPECIFICATIONS
NXES104 NXDT104
Network format
Compatible networks Ethersound™ netwokrs Dante™ networks
Network type Ethernet 100 Mb TCP/IP over Ethernet, 100 Mb or 1 Gb
Device addressing Automatic, based on MAC address Automatic, based on IP address with Zeroconf
Audio format
Number of channels 4 channels from network to NXAMP 4 channels from network to NXAMP
Resolution / Sample Rate 24 bits / 48 KHz 24 bits / 48 KHz
Latency 0.10 ms 0.25 ms to 5.0 ms
Front panel features
Network inputs 2 shielded Neutrik Ethercon® 2 shielded Neutrik Ethercon®
Additional port RJ45 for additional remote control Additional remote control/Dante™ port
LEDs on network ports Tx and Rx on each port Link/Act and Speed on each port
LEDs on additional port Link and activity Link and activity
Specifications
Power supply 3.3 Volts DC, 2 W from NEXO slot 3.3 Volts DC, 3 W from NEXO slot
Dimensions & weight 120 x 160 x 40 mm (NXAMP slot) - 160 g 120 x 160 x 40 mm (NXAMP slot) – 200 g
EMC certification CE, FCC, ICES CE, FCC
Green Status ROHS and REACH ROHS and REACH
Ordering information
Ordering code NX.ES104 NX.DT104
PAGE 131 OF 140