Setup Instructions

Example 1) Basic MTX3 system example (analog connections)

MTX Setup Manual

Making preliminary settings in MTX Editor

Here’s how to make detailed MTX system settings in MTX Editor.

When you’ve finished making settings, you should save them by clicking [File] menu, then [Save].

 Specifying the MTX configuration

Here you’ll specify how the MTX’s inputs and outputs will be handled.

Move to the System screen by clicking the tab of the system name you specified in step 1 of “Using the Device Config-

uration Wizard to create your device setup.”

On the [System] menu, click [MTX Configuration] to open the “MTX Configuration” dialog box.

The default settings are shown in the screen below. You can change them as necessary. In this example, we’ll use the

default settings without change.

NOTE

The “User Account Control” dialog box may appear. Click [Continue] or [Yes].