Setup Instructions

Example 4) A system using Dante
MTX Setup Manual
106
 Making EXT. I/O settings
Make settings for inputting and outputting digital audio. First make YDIF and Dante settings for System B. Click the
SYSTEM tab to access the setting screen.
1.
Click the [EXT. I/O] button.
The “EXT. I/O” screen will appear, allowing you to make input/output settings for the external devices. Since
you’ll be making settings for YDIF 1–8, there’s no need to switch screens; simply make the settings in this screen.
2.
In the lower left, click the [EDIT] button.
Now you can specify the outputs from the MTX to YDIF 1–8.
3.
Click the output routing select button located below YDIF 1.
The “YDIF Out Patch” dialog box will appear.
[EDIT] button Output routing select buttons