User's Manual

“ZONE” screen Chapter 4. System screen
MTX Editor User’s Manual
78
“ZONE” screen
In this screen you can specify how input signal priority will control output signals.
Signal flow
In this screen you can make settings for the ducker and the “Ambient Noise Compensator”
(subsequently called “ANC”).
The ducker is a function that temporarily reduces the input from one channel when an audio signal
is input to another specified input channel, allowing the audio from the specified channel to be
heard clearly. The priority order is as follows: “1st PRIORITY > 2nd PRIORITY > Matrix Out
signal.”
ANC is a function that boosts or attenuates the output signal from the MTX according to the level
that is being input via an ambient noise detection mic. The ANC function provided by the MTX is
a gap-type ANC that detects silent intervals such as between songs, detects the noise level during
those intervals, and varies the level accordingly.
1
2
4
3
PRIORITY
DUCKER
ANC
AMBIENT
SOURCE
From INPUT CHANNEL POST ON 1-16
*1 From YDIF IN 1-16
*1 DISTRIBUTION MODE only
From ANC BUS 1-2
From STEREO INPUT CHANNEL POST ON 1L-3R
ZONE 1-8
ZONE OUT
To YDIF
OUTPUT
PATCH
MIXMIX
2nd PRIORITY 1st PRIORITY ANC
PRIORITY
SOURCE
PRIORITY
SOURCE
From DIRECT INPUT POST ON 9-16
PRIORITY
DUCKER
METER
ON
D
C
A
MASTER
LEVEL
GR
GR
AMBIENT
METER