User Manual

3 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions

Attach the 6" or 8" space spock drum.

n Your extra 6" or 8" or both will have a pre-installed

metal bridge (image C). These bridges take the

place of the regular Yamaha lug casing.

n Attach the metal bridge to the corresponding shell

as shown in your configuration diagram.

n Locate the bag of bolts, washers and nuts with

sprocket (image D).

n Place your 6" or 8" or both on a flat surface within

your drum array configuration so you can connect

them to the correct corresponding shell.

• Insert the bolts through the holes in the shell.

• Slide the channel of the bridge down the bolt head.

• Fasten the nut on the inside of the shell (image D).

NOTE: The height of the bridge is important. Image D

shows the top half of the bolt head. This is the ideal

height for the bridge on both shells.

C D