Owner`s manual

23
“DRUM KEY” Dialog
1 Key ..........................Indicates the note name to be edited.
2 Keyboard ................Click on the keyboard to specify note assigned to the Element or
Voice you are editing. The text box to the left shows the note name.
3 TYPE .......................Determines the bank of the sound source: Preset wave or User wave/
voice.
4 WAVE.......................To select a waveform as the source, click this and then the text box
next to it to select the waveform.
5 VOICE......................To select a voice as the source, click this and then the text box next to
it to open the “Voice List” dialog.
6 COARSE .................Use the “COARSE” knob to tune the Element’s pitch in coarse
increments (semitones).
7 VELOCITY...............Use the “VELOCITY” knob to define how the Element’s pitch varies
with note velocity.
8 FINE ........................Use the “FINE” knob to further fine-tune it.
9 CUTOFF ..................Use the “CUTOFF” knob to set its LPF Cutoff Frequency.
) VELOCITY...............Use the “VELOCITY” knob to define how the Element’s filter opens/
closes in response to note velocity.
! RESO ......................Use the “RESO” knob to set the LPF Resonance level.
@ HPF .........................Use the “HPF” knob to set the HPF Frequency.
# AMPLITUDE VELOCITY .Use the “VELOCITY” knob to define how the Element’s output level
varies with note velocity.
$ RECEIVE NOTE......Click on the text box and select whether or not to receive notes.
% KEY ASSIGN ..........Click on the text box and select Single key assignment or Multi key
assignment.
^ ALTERNATE GROUP ....Click on the text box and select an alternate group number. This is
used to prevent a pair of drum sounds from sounding simultaneously
(for example, an open and closed hi-hat).
1
2
3
4
5
$
%
^
&
#
•
*
(
º¡ ™£ ¢ ∞ § ¶
876!@)9