User Manual

4
Studio Manager Version 2 Owner’s Manual
4 Click [OK].
The Setup window closes, and the Studio Manager win-
dow becomes active, with the icon of the device you
selected in step 2 shown in the workspace.
5 Double-click the icon for the hardware
product you want to edit to open its Editor.
NOTE: Right-clicking the mouse in the window will
display a pop-up menu (see page 8).
NOTE: To change the icon name, select the icon, then
click the name.
NOTE: Use the following box, if necessary.
[MIDI Thru Ch.] .. This field appears if MIDI Thru is
enabled.
If you select “Original,” a MIDI
signal will be output to the output
channel that has the same number
as the input channel.
If you select any channel from “1”
through “16,” MIDI signals of all
channels received at the input port
will be combined and output to the
specified channel.
Studio Manager window