Owners Manual

MODX+ Owner’s Manual
51
You can set various parameters in the Utility display. In particular, you can set the parameters that apply to the entire system of
this instrument by touching the [Settings] tab. The changes you make in the Utility display are activated once you press the
[EXIT] button to return to the original display. This section describes some useful functions related to the entire system settings.
Setting automatic power-on tasks
You can determine which display is automatically called up
when power is turned on: the Live Set display or the
Performance Play display.
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab

[System] tab.
2 In [Power on Mode], select “Live Set” (Live
Set display) and the slot number, or
“Perform” (Performance Play display) as the
start-up display.
3 Press the [EXIT] button.
This stores the setting and returns to the previous
display.
Setting button lamp behavior
You can control the dimming of the button lamps.
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab

[System] tab.
2 Set “Half Glow” to “Off,” “1/4,” or “1/2.”
When “Off” is selected, the dimming function is turned
off.
When “1/4” is selected, the brightness of the button in
the dimly lit condition is reduced to 25% of the fully lit
condition. This lighting level is suitable for dark
surroundings, such as a stage.
When “1/2” is selected, the brightness of the button in
the dimly lit condition is reduced to 50% of the fully lit
condition. This lighting level is useful in bright
surroundings (such as outdoors) when it is hard to
distinguish whether the button is dimly lit or off.
3 Press the [EXIT] button.
This stores the setting and returns to the previous
display.
Turning various functions on/off
You can set various functions by touching the [System] tab
on the Utility display.
Turning animation on/off
You can turn the animation of screen transition on/off as
follows.
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab

[System] tab.
2 Select “ON” or “OFF” in “Animation” to turn
the animation on or off.
3 Press the [EXIT] button.
This stores the setting and returns to the previous
display.
Turning display blur effect on/off
When any display is selected, the display previously
selected is blurred. You can turn the function on/off as
follows.
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab

[System] tab.
2 Set “Blur” to “ON” or “OFF” to turn the blur
effect on or off.
3 Press the [EXIT] button.
This stores the setting and returns to the previous
display.
Making Global System Settings