Owners Manual

MODX+ Owner’s Manual
33
Playing the Keyboard
Mixing
Each Mixing can contain up to 16 Parts and a separate
Mixing can be created for each Part. You can adjust the
various mixing related parameters for each Part: volume,
pan, etc.
Basic procedure for Mixing
1 Touch the [Mixing] tab on the left side of the
Performance Play display.
The Mixing display appears.
1 Main category for each Part
2 Switching displays between 3-band EQ / 2-band EQ
3 EQ setting for each Part
4 Parameter values for each Part
5 Changing the display for Parts 1–16
6 Changing the display for the audio Parts (Parts 9–16
are not displayed)
2 Press the [PART SELECT MUTE/SOLO]
button
 [1]–[16] buttons to select the
desired Part for which you want to adjust the
parameter values.
NOTE
By touching [Audio] (6) on the screen, the audio Part are
shown. You can set the parameters relating to the audio data
(AD Part) input from the A/D INPUT [L/MONO]/[R] jacks and the
audio data (Digital Part)* input from the [USB TO HOST]
terminal.
*The audio data which is set as “Digital L/R” among device ports
3 Move the cursor to the parameters for each
Part and change the parameter values by
turning the Data dial.
NOTE
• For more detailed parameter settings, press the [EDIT] button
in the Mixing display to open the Edit display.
• For details about the Mixing parameters and Mixing Edit, see
the Reference Manual PDF document.
Controlling the Super Knob by using a foot
controller
You can control the Super Knob by using a foot
controller (FC7).
1 Connect the foot controller (FC7) to the
FOOT CONTROLLER [1]/[2] jack.
2 Move the cursor to the Performance
name on the Performance Play display
and then press the [EDIT] button.
3 Touch the [Control] tab in the left of the
screen
 [Control Number] tab.
4 Set “Foot Ctrl 1” or “Foot Ctrl 2” to
“Super Knob”—depending on which jack
you connected the foot controller (FC7).
1
4
2
5
6
3