User Manual

10
2. Data Entry
2-1. Entering Room Conditions
Click "OK" on the Project Settings screen to start a new project. If you click "OPEN" on the HOME
screen and select an existing project, the screen that was displayed when the project was saved
appears.
Room information settings
On this screen, enter the environmental information of the target room
・ Project name
Enter a name for managing this design information.
(e.g.) Yamaha Corporation, meeting room, acoustic design
➢ ROOM INFO
• Width (X): Enter the width of the room.
• Depth (Y): Enter the depth of the room.
• Ceiling Height (Z): Enter the height of the room.
• Listening Ear Height: Enter the measurement height. In most cases, this will be the height
of the listener's ears.
• Image: The room plan or another image can be imported into the diagram on the right side
of the screen. Imported images may be moved or resized.
➢ MEMO
Enter a memo. The memo is also printed in reports. Enter information about the room or any
other relevant information.
When you enter these values, they are reflected in the diagram on the right side of the screen so you
can get a general idea of the room dimensions.
Note: Values are entered here in meters. You can also switch to inches. This can be changed
in the Options screen.
Note: Please use a period as a decimal point when entering numbers. Commas will be ignored.