Data Sheet
ANALOG INPUT SPECIFICATIONS
ANALOG OUTPUT SPECIFICATIONS
Input
Terminals
GAIN
Actual Load
Impedance
For use with
nominal
Input level
Connector
Nominal
Max. before clip
0
-60dB
3k
Ω
50-600Ω Mics
& 600
Ω Lines
-60dBu -40dBu
XLR3-31 type*
26 -34dBu -14dBu
0
-16dB
-16dBu +4dBu
26 +10dBu +30dBu
Actual Source
Impedance
For Use With
Nominal
Output Level
Connector
Nominal
Max. before clip
75Ω 10kΩ Lines
+4dBu +24dBu
Euroblock*
D-sub 25pin*
*
With the supplied rubber pads assembled.
439
430
375.5
353.5
17
348
43
51
220
65
350
480
44
45
22
423
1
23
456 7 8
*
MLA8
MLA8
8-channel Mic/Line Amplier
Rear Panel
Eight-channel microphone and line preamplier inherits acclaimed DM2000
head-amp technology.
• Unparalleled articulation and sonic quality descended from Yamaha’s internationally acclaimed digital mixing consoles.
• 26 dB pad, adjustable 44 dB gain trim, 80 Hz high-pass filter, and phantom-power switch on each channel in a space-saving 1U design.
• Convenient color-coded control interface.
• XLR connectors are provided for audio input, while output connections can be made via either D-sub 25-pin or Euroblock connectors.
• The D-sub 25-pin connector is compatible with the MY8-AD96 8-channel Mini-YGDAI A/D card, providing seamless connectivity with
Yamaha digital mixers.
GENERAL SPECIFICATIONS
Total harmonic distortion
*
1
Less than 0.1% (THD+N) 20Hz to 20kHz @ +14dBu, 10kW (Input GAIN = Max.)
Frequency response 0+0.5,-1dB 20Hz to 20kHz @ +4dBu, 10kW (Input GAIN = Max.)
Hum & noise level*
2
(20Hz to 20kHz), Rs=150Ω
-128dBu Equivalent input noise (PAD off, GAIN Max.)
-99dBu (68dB S/N) PAD on, GAIN Max.
-108dBu (65dB S/N) PAD off, GAIN Min.
-82dBu (92dB S/N) PAD on, GAIN Min.
Crosstalk
(PAD on, GAIN Min.)
-90dB @1kHz adjacent input channels
-70dB @10kHz
Maximum voltage gain
64dB CH IN to CH OUT
Channel PAD
26dB
Channel gain
44dB Variable
Channel HPF
80Hz, 12dB/oct
Phantom Power
+48V DC Phantom voltage ON/OFF switch
Channel LED
SIGNAL (Green), PEAK (Red)
Power requirements Japan: AC100V, 50/60Hz
North America: AC110-120V, 50/60Hz
Other Areas: AC220-240V, 50/60Hz
Power consumption 25W
Dimensions (W x H x D) 480 x 44 x 375.5mm (18.9" x 1.73" x 14.8"),1U
Weight 4.7kg (10.3lbs)
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with
infinite dB/Oct attenuation.
DIMENSIONS
unit : mm