User Manual

Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 11
iv. Enter the M7CL console’s MAC address noted in 3.1. When entering
the MAC Address, the colons between sets of characters will be
automatically added by StageMix.
v. Select the Model of M7CL console.
vi. Press the [ADD MIXER] button at the bottom of the screen.
3.3.3 Select a Mixer and Begin Working
If your iPad has been configured to work with an M7CL console, select
the mixer from the list and press [CONNECT]. (The model of mixer
(M7CL-48 or M7CL-32) will appear in smaller text below the mixer’s
name.)
The message “Syncing With M7CL…” will appear while StageMix is
obtaining parameters from the console. After this process is complete,
the Mixer window will appear and StageMix is ready to be used.
If you are using an 802.11n or 802.11ac Wi-Fi access point, you may
not be able to proceed beyond the “Syncing With M7CL…” display. If
this happens, change the LINK MODE parameter in the Network
settings from “100BASE-TX” to “10BASE-T” (see "M7CL Network
Setup”; section 3.1).
If StageMix cannot connect with your M7CL console, refer to the
Troubleshooting section (11.0) at the end of this document for possible
solutions.