User Manual

Step 2 Launching AVS-Monitor
8
Setting device names
By default AVS-Monitor identifies devices by their MAC addresses, (a 12 digit hexadecimal number).
To make configuration operations easier, it is recommended to set names for each device.
For each device:
① Select the device in the Tree view or List view.
② Click on the properties tab.
③ In the “Name Box”, type in a name.
In this example set the following names for the three devices.
 MY16-ES64 (M7CL)
 NAI48-ES
 DME8o-ES
Note: The name is stored in your computer and not the EtherSound device. If you connect to the
device with a different computer, then the name will not appear.